From Movement to Higher Windings

Jump to the article here

Kernidee: Het Vacuum.Net-onderzoeksprogramma start met een simpel idee: beweging als een oneindige reeks van drie stappen (vooruit, stil, achteruit), die zowel als een positie (adres) als een berekening kan worden geïnterpreteerd.

Wiskundige resultaten: De onderzoeken bewijzen dat twee verschillende reeksen dezelfde positie kunnen beschrijven (een “edge”) en dat het algemeen omkeren van een berekening naar een adres een extra, niet-constructief logisch principe (LLPO) vereist.

Van positie naar pad: De theorie breidt zich uit door beweging niet als een functie maar als een pad te zien, waardoor “cycli” en “windingen” (het aantal rondjes om een cirkel) wiskundig meetbaar worden, zelfs als start- en eindpunt gelijk zijn.

Hogere dimensies: Het programma onderzoekt of deze constructie kan worden opgeschaald van cirkels naar hogere-dimensionale structuren zoals bollen en complexere topologische ruimtes (W0 tot W5).

Doel en methode: Het uiteindelijke doel is om te zien of deze wiskundige structuur iets kan onthullen over irreguliere patronen in complexe systemen, waarbij alle nieuwe resultaten formeel worden geverifieerd met computerassistentie (Cubical Agda).

    Infographic in Dutch showing the progression from motion and two readings to higher windings in Vacuum.Net theory, illustrated with mathematical diagrams and a cosmic landscape.

    J.Konstapel,Leiden, 20-11-2026.

    in 2012 I detected a pattern in Mathematics that is now confirmed here.

    Edges, Choice, Cycles and the Emerging Mathematical Landscape of Vacuum.Net

    An introduction to the mathematical development, its foundations, its wider implications and its research prospects

    J. Konstapel · Constable Research · November 2026


    Abstract

    The Vacuum.Net research programme begins with a simple idea: movement can be represented as a sequence of elementary steps. Each step can move forward, remain still, or move backward. Such steps can be combined into an infinite sequence.

    The same sequence can then be interpreted in different ways. It can describe a position, or it can perform a calculation. This apparently simple distinction leads to a number of deeper mathematical questions.

    What happens when two different descriptions refer to exactly the same position? Where is the boundary between two representations? Can a calculation always be reversed? What happens when a sequence of movements eventually returns to its starting point? And can these returning patterns be extended into higher-dimensional mathematical structures?

    Two recent research documents address these questions. Edges, Choice and Countable Cycles establishes results about the boundary between representation and computation. It also identifies a connection with constructive logic. Upward in the Windings takes the next step. It investigates how movements can retain their history, how cycles can be counted, and how the mathematical structure might extend from circles to spheres and higher topological spaces.

    The programme combines several areas of mathematics. These include number representation, constructive analysis, mathematical logic, algebraic topology and homotopy type theory. It also uses computer-assisted formal proof.

    The central development can be summarised as follows:

    Movement → Representation → Edge → Choice → Cycle → Winding → Higher-dimensional structure.

    This essay explains that development without assuming prior knowledge of the technical subjects involved. It distinguishes established mathematics from new results and from wider interpretations. It also discusses what the programme might eventually contribute to the study of complex systems, organisations and human societies.

    The ultimate research question is whether the mathematical structure of Vacuum.Net can reveal something about irregular and apparently unpredictable patterns, rather than merely reproducing mathematical structures that are already known.


    1. The starting point: reality as movement

    Most mathematical descriptions begin with objects, numbers or states. Vacuum.Net takes a different starting point. It begins with movement.

    A movement is described by one of three elementary possibilities:

    • R (Right): a step forward, represented by +1.
    • O (Standing): no movement, represented by 0.
    • L (Left): a step backward, represented by −1.

    These three possibilities are called trits. The word is derived from the word digit, but refers to a system with three possible values rather than two.

    A sequence of trits might look like this:

    R O L R R O L ...

    Each element describes one elementary step. Together they form a stream.

    A stream is not necessarily finite. It can continue indefinitely. This is important because the theory is interested in structures that emerge through repeated movement, rather than only in isolated events.

    Consider a simple example. A person walks forward, pauses, walks backward, and then repeats the sequence. The individual steps are simple. But their combination creates a pattern.

    That pattern may eventually repeat. It may change. It may settle into a stable rhythm. Or it may never return to precisely the same configuration.

    The first important distinction is therefore between an individual movement and the structure produced by a sequence of movements.

    This is the foundation of the Vacuum.Net ladder.

    1.1 Why use three possible directions?

    The three-valued system is not merely a convenient notation.

    A binary system distinguishes between two alternatives. Vacuum.Net introduces a third possibility: remaining in the same position.

    This makes it possible to describe movement and non-movement within the same framework.

    The three values also allow a stream to be interpreted mathematically in two different numerical systems. This is where the first significant result emerges.


    2. One stream, two interpretations

    The same sequence of trits can be read in two different ways.

    The first interpretation uses balanced ternary. The second uses signed binary.

    These names may sound technical, but the underlying idea is straightforward.

    A positional number system assigns a numerical weight to each position in a sequence. The value of a digit depends on where it occurs.

    In the familiar decimal system, the digits represent powers of ten. In binary, they represent powers of two. In ternary, they represent powers of three.

    Vacuum.Net uses the values −1, 0 and +1.

    2.1 The address interpretation: base three

    When a stream is interpreted in balanced ternary, its value is:

    [
    x=\sum_{i=1}^{\infty}d_i3^{-i}
    ]

    Here, each (d_i) is one of the three values −1, 0 or +1.

    The resulting value lies between −1/2 and +1/2.

    This interpretation can be understood geometrically.

    Imagine an interval. Divide it into three equal parts. The first digit selects one of these parts. Then divide the selected part into three smaller parts. The second digit selects one of those. Continue in the same way.

    Every additional digit identifies a smaller region.

    The complete sequence therefore describes an increasingly precise location.

    Vacuum.Net calls this an address.

    The important point is that an address is not simply a number. It is a sequence of decisions that identifies a position through successive subdivisions.

    This is similar to navigating through a hierarchy of increasingly specific locations.

    2.2 The computational interpretation: base two

    The same stream can also be interpreted using powers of two:

    [
    y=\sum_{i=1}^{\infty}d_i2^{-i}
    ]

    The result lies between −1 and +1.

    This is a signed binary representation because the digits can be negative as well as positive.

    Unlike an ordinary binary representation, this system is redundant.

    Redundancy means that different sequences can produce the same numerical value.

    At first sight, redundancy might seem undesirable. Why should a number have more than one representation?

    In computation, however, redundancy can be useful. It allows intermediate representations to overlap. This can make certain operations easier and avoid the need for immediate normalisation into a unique representation.

    The same principle occurs in several areas of mathematics and computer science. A representation does not always need to be unique to be useful.

    2.3 The fundamental distinction

    We now have two readings of the same stream:

    ReadingMathematical functionInterpretation
    Balanced ternaryIdentifies a positionAddress
    Signed binaryComputes a numerical valueCalculation

    This distinction is central to the research programme.

    An address describes where something is. A calculation describes what value results from a sequence of operations.

    The two readings can agree about a numerical position while using different streams.

    That leads directly to the concept of the edge.


    3. The edge: when two descriptions identify the same place

    An edge occurs when two different streams describe exactly the same position.

    This is not an error. Nor is it an approximation.

    It is a precise mathematical property of the representation.

    The first research note gives a simple example:

    [
    \frac{1}{6}=0.RLLL\ldots=0.ORRR\ldots
    ]

    The two sequences are different.

    The first begins with R and continues with L. The second begins with O and continues with R.

    Nevertheless, both identify the same position in the balanced ternary system.

    This resembles a familiar phenomenon in decimal notation:

    [
    0.5000\ldots=0.4999\ldots
    ]

    Two different infinite expansions can identify the same real number.

    Vacuum.Net investigates this phenomenon using its three-valued movement system.

    3.1 The mathematical form of the edge

    The research establishes a more precise result.

    Suppose two streams agree up to a particular position and then differ.

    If they still describe the same place, their difference must have a very specific form.

    After exchanging the two streams if necessary:

    • The differing digits must be R and O, or O and L.
    • After that position, one stream must continue with L forever.
    • The other must continue with R forever.

    This is the Edge Theorem.

    The result excludes other possible patterns.

    The two streams cannot drift arbitrarily far apart while continuing to represent the same position.

    A second theorem expresses this through integer values of finite prefixes.

    Let (V_n(s)) denote the integer value of the first (n) digits of stream (s).

    Two streams identify the same place precisely when:

    [
    |V_n(s)-V_n(t)|\leq 1
    ]

    for every finite prefix length (n).

    In other words, the difference between the two representations must remain within one unit at every level.

    If the difference reaches two or more at any finite level, the streams cannot represent the same place.

    This gives the edge a precise mathematical definition.

    3.2 Why this matters

    The significance goes beyond the example of two number representations.

    The edge is the point at which two different descriptions remain compatible with the same underlying position.

    The system does not necessarily contain enough information to distinguish between them.

    This is an important distinction between a state and its representation.

    A state can be well-defined even when its representation is not unique.

    For social scientists, this distinction may be familiar in another context.

    Two people can describe the same institutional situation in different ways. Their descriptions may differ because they use different perspectives, categories or histories. Yet they may still refer to the same underlying situation.

    The mathematical result does not prove anything about social interpretation. It does, however, provide a precise model of the distinction between a position and the descriptions used to identify it.

    The edge is where those descriptions meet.


    4. From the edge to the problem of choice

    The next result is more surprising.

    The research asks whether it is always possible to reverse the computational interpretation and recover an address.

    In other words:

    If we know the value produced by a stream, can we always construct the corresponding balanced ternary address?

    In classical mathematics, the existence of an appropriate representation is generally accepted.

    But constructive mathematics asks a more demanding question.

    Can we actually construct the representation using only the information and operations available to us?

    This distinction is essential.

    4.1 What is constructive mathematics?

    Classical mathematics often accepts a statement if it can be shown that something exists, even when no explicit method is provided for finding it.

    Constructive mathematics requires more.

    To prove that an object exists, one must provide a construction or a method that produces it.

    The difference is not between correct and incorrect mathematics. It is between different standards of mathematical evidence.

    A classical proof may establish that one of two alternatives must hold.

    A constructive proof may require an actual procedure that identifies which alternative holds.

    This difference becomes important when dealing with infinite sequences.

    4.2 LLPO: a decision hidden inside an infinite sequence

    The research introduces a principle called LLPO.

    The full name is the Lesser Limited Principle of Omniscience.

    Consider an infinite sequence containing only zeros and ones.

    Suppose we know that there can be at most one occurrence of the value 1.

    LLPO states that:

    • Either there is no 1 at any even position.
    • Or there is no 1 at any odd position.

    The principle does not require us to find the 1.

    It requires us to determine which of the two groups of positions is empty.

    For example, if the sequence contains a single 1 at position 7, then the even positions contain no 1.

    If the 1 occurs at position 8, the odd positions contain no 1.

    Classical mathematics accepts this division.

    Constructive mathematics does not generally permit the decision without additional information.

    LLPO is therefore a logical principle about the possibility of making a particular decision concerning an infinite sequence.

    4.3 The Choice Theorem

    The first research note proves:

    Every general function that transforms the signed-binary stream into a balanced-ternary address for the specified corresponding value implies LLPO.

    The construction uses a particularly important point.

    The input value is 1/2. After division by three, the output is 1/6.

    But 1/6 is precisely the edge identified earlier.

    The proof constructs streams that approach this boundary from different sides.

    The first digit of the resulting address reveals which side of the boundary the stream occupies.

    That first digit therefore determines the LLPO decision.

    The implication is significant:

    A general procedure that reverses the calculation and produces the address must contain enough logical strength to make this decision.

    The result is machine-checked in Cubical Agda.

    4.4 What does this mean in practice?

    It does not mean that computers cannot calculate addresses.

    Nor does it mean that every particular number is difficult to represent.

    It means something more precise.

    A general transformation of this kind cannot be justified within the stated constructive framework without assuming a principle that the framework does not prove.

    Under classical logic, LLPO is accepted. Under Bishop-style constructive mathematics, it is not generally available.

    The boundary therefore separates two different kinds of mathematical reasoning.

    This is why the research describes the edge as a place where a decision is required.

    The decision is not supplied by the calculation alone.

    This is a mathematical result, not yet a theory of human decision-making. The latter is an interpretation developed later in the programme.


    5. From positions to movements: why paths matter

    The next stage changes the mathematical object being studied.

    Until now, a stream has been treated primarily as a representation or a function.

    But a movement can also be understood as a path.

    This distinction is fundamental.

    A function tells us how one state is related to another.

    A path also retains the fact that a movement has taken place.

    Consider walking around a circular track.

    You begin at the starting point. You complete one lap and return to exactly the same place.

    If we only record the starting and ending positions, nothing appears to have happened.

    The beginning and ending positions are identical.

    But the movement itself is not trivial. You have travelled around the track.

    This illustrates the difference between knowing where you are and knowing how you got there.

    The research programme calls this the return of movement history.

    5.1 What is a cycle?

    A cycle is a sequence of movements that returns to its starting configuration.

    For example:

    [
    A\rightarrow B\rightarrow C\rightarrow A
    ]

    The system has returned to A.

    The path is closed because its beginning and end coincide.

    A cycle can have two or more steps. It can also be repeated.

    The mathematical question is whether the movement can be counted, even when the starting and ending positions are identical.

    This leads to the concept of winding.

    5.2 What is a winding?

    Imagine a point moving around a circle.

    After one complete revolution, it returns to its starting point.

    We say that it has made one winding.

    After two revolutions, it has made two windings.

    After three, it has made three.

    The winding number records how many times the movement travels around the circle.

    A positive direction counts positively. Movement in the opposite direction counts negatively.

    The important point is that the winding number records the history of the movement, not merely its final position.

    For example, the following two paths have the same starting and ending point:

    • A path that remains stationary.
    • A path that makes one complete revolution.

    But their winding numbers are different.

    The first has winding number zero. The second has winding number one.

    This is the first step towards a richer mathematical description of movement.


    6. Why the circle is not enough: the introduction of topology

    To understand the next development, we need to introduce topology.

    Topology is the branch of mathematics that studies properties of spaces that remain unchanged under continuous deformation.

    A circle can be stretched into an oval. It can be bent. It can be made larger or smaller.

    But as long as it remains a closed loop, it retains its essential topological structure.

    A sphere can similarly be deformed without cutting or tearing it.

    Topology is interested in these underlying structures rather than exact distances or angles.

    6.1 The circle as a mathematical object

    The circle is usually represented by:

    [
    S^1
    ]

    The letter S refers to a sphere in the topological sense. The superscript 1 indicates that the circle has one dimension.

    The two-dimensional sphere, the surface of an ordinary ball, is written:

    [
    S^2
    ]

    The three-dimensional sphere is written:

    [
    S^3
    ]

    The distinction can be understood through the dimensions of the surfaces.

    • (S^1) is a one-dimensional circle.
    • (S^2) is a two-dimensional spherical surface.
    • (S^3) is a three-dimensional sphere.

    The word sphere here has a precise mathematical meaning. It does not necessarily refer to an ordinary physical ball.

    6.2 What is a homotopy group?

    A homotopy group records the different ways in which a space can be traversed by loops or higher-dimensional closed structures.

    The notation is:

    [
    \pi_k(S^n)
    ]

    Here, (n) describes the dimension of the space. The number (k) describes the dimension of the object being mapped into that space.

    For (k=1), we study loops.

    For higher values of (k), we study higher-dimensional analogues of loops.

    The mathematical idea is that a closed movement can have different forms that cannot be continuously transformed into one another without breaking the relevant structure.

    Homotopy groups classify these distinctions.

    For the circle, the fundamental result is:

    [
    \pi_1(S^1)\cong\mathbb{Z}
    ]

    The symbol (\mathbb{Z}) represents the integers:

    [
    \ldots,-2,-1,0,1,2,\ldots
    ]

    This means that the different winding classes around a circle can be counted using positive and negative whole numbers.

    One revolution is 1. Two revolutions are 2. A revolution in the opposite direction is −1.

    This is a fundamental result of algebraic topology.

    It was also formally proved in the setting of Homotopy Type Theory by Licata and Shulman in 2013.


    7. The problem with Kring: a space that forgets movement

    The Vacuum.Net programme encounters an important difficulty when it connects the original ladder to the circle.

    The earlier mathematical construction joins the two ends of an interval. The resulting space is called Kring.

    Intuitively, joining the ends of a straight interval creates a circle.

    However, the mathematical construction in the original Vacuum.Net theory has a limitation.

    Kring is constructed as a set.

    In this context, a set is a mathematical object in which there is no distinction between different paths connecting the same two points.

    The construction therefore loses the information needed to distinguish one winding from another.

    The first research note establishes:

    Every map from the circle (S^1) to Kring is constant.

    In ordinary language, the resulting structure cannot represent the non-trivial winding behaviour of a genuine circle.

    This is not a defect in the proof. It identifies a limitation of the mathematical construction.

    Kring knows the positions. It does not retain the turns.

    This distinction motivates the next development.

    7.1 Restoring the paths

    The solution is to introduce a new mathematical construction called Wind.

    Wind contains:

    • A point for every stream.
    • A path from every stream to its tail.

    The tail of a stream is simply the sequence obtained by removing its first digit.

    For example:

    R O L R ...

    has the tail:

    O L R ...

    In Wind, the step from a stream to its tail is represented as a path.

    The distinction is important.

    The path is no longer merely a relationship between two states. It is part of the mathematical structure.

    This allows the theory to retain the movement itself.

    The research then defines a map called tel.

    The map sends every point of Wind to the base point of the circle. Each forward step contributes one complete turn. A backward step contributes minus one turn.

    In this way, movement in Wind can be translated into winding around the circle.

    This is the central construction of the first stage of Upward in the Windings.


    8. The first new result: periodic streams carry measurable windings

    A periodic stream is a stream that eventually repeats.

    In the simplest case, it returns to exactly the same stream after a fixed number of steps.

    For example, consider a stream with a repeating three-step pattern.

    After three steps, the same sequence reappears.

    The research proves that these steps form a closed loop in Wind.

    Under the map tel, this loop winds exactly three times around the circle.

    More generally, if the stream returns to itself after (k) steps, the resulting loop has winding number (k).

    This is Theorem 5 in Research Note 1.

    The result also proves that repeating the cycle (m) times produces a winding number of:

    [
    m\cdot k
    ]

    For example, a cycle of three steps repeated twice produces six windings.

    The important result is that the history of the movement has become mathematically measurable.

    8.1 Edges lead to the simplest cycles

    The next theorem connects the original edge results with the new theory of windings.

    The two streams that describe an edge eventually become constant:

    [
    LLLL\ldots
    ]

    or

    [
    RRRR\ldots
    ]

    A constant stream is its own tail.

    It therefore returns to itself after one step.

    This produces a cycle with period one.

    Under the map tel, that cycle has winding number one.

    This establishes a direct mathematical connection between the two research documents.

    The first document identifies the exact form of an edge.

    The second construction shows that each of its two representations eventually reaches a simple cycle.

    The edge is therefore connected to the simplest possible recurring movement.

    This is an important bridge between representation, choice and cyclic structure.


    9. From one winding to windings of windings

    The title Upward in the Windings expresses the next ambition.

    The programme is no longer limited to counting movements around a circle.

    It asks whether the same approach can be extended to higher-dimensional structures.

    A loop around a circle is a winding of the first kind.

    But what would a winding of the second kind look like?

    Imagine a closed movement that does not simply travel around a line-like circle. Instead, it traces a closed pattern across the surface of a sphere.

    We now have a higher-dimensional structure.

    The same question can be asked again at still higher levels.

    This is why the mathematical language of homotopy groups becomes relevant.

    The programme proposes a sequence of research levels, from W0 to W5.

    Each level has an established mathematical background and a new question for Vacuum.Net.

    9.1 W0: the circle

    [
    \pi_1(S^1)\cong\mathbb{Z}
    ]

    The loops around the circle are classified by whole numbers.

    This is the starting point.

    The first Wind construction establishes that periodic streams carry loops with the expected winding number.

    However, an important question remains open.

    The research has not yet proved that all loops at a periodic point of Wind are exactly the integers.

    The current result establishes their winding numbers under tel. It does not yet establish a complete classification of every possible loop in Wind.

    This distinction matters.

    The next step is to complete the W0 programme by proving the stronger statement.

    9.2 W1: the sphere

    The next level asks whether the Vacuum.Net ladder can generate the two-dimensional sphere (S^2).

    The relevant established mathematical result is:

    [
    \pi_2(S^2)\cong\mathbb{Z}
    ]

    The loops of the appropriate higher-dimensional kind around a sphere are again classified by whole numbers.

    More generally, the homotopy groups of a sphere in its own dimension satisfy:

    [
    \pi_n(S^n)\cong\mathbb{Z}
    ]

    The research question is whether a ladder of pairs of trits can produce the sphere in a natural way.

    This is not yet a proven Vacuum.Net result.

    It is a proposed extension.

    The central issue is whether the construction that produces the circle can be generalised to produce a spherical surface.

    9.3 W2: the Hopf construction

    The next level introduces the Hopf map.

    This is a famous construction in topology:

    [
    S^3\rightarrow S^2
    ]

    The Hopf map connects the three-dimensional sphere with the two-dimensional sphere.

    It has an especially interesting geometric interpretation.

    The inverse image of each point on the two-dimensional sphere is a circle in the three-dimensional sphere.

    In other words, the structure of one sphere is connected to a family of circles in another.

    The Hopf fibration is a particularly important example of a fibre bundle.

    A fibre bundle is a mathematical structure in which a complicated space is organised into simpler pieces, called fibres, arranged over a base space.

    In this case, the fibres are circles.

    The Hopf construction gives:

    [
    \pi_3(S^2)\cong\mathbb{Z}
    ]

    The research question is whether the Hopf structure can be recognised as a pattern in the Vacuum.Net ladder.

    One possibility is that the ladder may reveal circles of trits associated with points on a spherical structure.

    This remains a research question.

    The resemblance between the geometric construction and the movement system must be demonstrated mathematically. It cannot be assumed from visual similarity.

    9.4 W3: the first twist

    The next level introduces a striking mathematical result:

    [
    \pi_4(S^3)\cong\mathbb{Z}/2
    ]

    This means that the relevant winding structure has two possible classes.

    The notation (\mathbb{Z}/2) describes arithmetic in which two is equivalent to zero.

    In this structure:

    [
    1+1=0
    ]

    A movement performed twice can therefore be equivalent to no movement at all.

    This is fundamentally different from the ordinary circle, where two windings remain two.

    The result was formally established through the work of Brunerie and later machine-checked by Axel Ljungström and Anders Mörtberg in Cubical Agda.

    Their work is particularly relevant because it demonstrates how difficult mathematical structures can be verified through computation.

    The Vacuum.Net research asks whether the appearance of the number two is connected to its own base-two ladder.

    This is an intriguing possibility.

    But it is not yet a theorem.

    The connection may be meaningful, or it may be coincidental.

    The programme explicitly treats this as an open question.

    9.5 W4: the frontier

    The next level considers:

    [
    \pi_5(S^3)\cong\mathbb{Z}/2
    ]

    This is an established classical mathematical result.

    However, the corresponding Brunerie number has not yet been computed in Cubical Agda, according to the research plan.

    This creates an opportunity.

    Can the Vacuum.Net approach help make the calculation shorter, more transparent or more intuitive?

    Or does it simply reproduce an existing result without adding anything?

    W4 is therefore a genuine research frontier.

    It is not enough to show that the same answer can be obtained. The programme must demonstrate what its particular structure contributes.

    9.6 W5: order and chaos

    The final level in the current plan concerns the relationship between regularity and irregularity.

    Some mathematical structures exhibit remarkable periodic behaviour.

    Bott periodicity is an important example.

    Raoul Bott demonstrated that certain homotopy groups of classical mathematical groups repeat in regular cycles.

    The stable unitary groups exhibit a period of two. The stable orthogonal and symplectic groups exhibit a period of eight.

    These are deep structural results.

    But the higher homotopy groups of spheres do not display the same simple periodic pattern.

    Their structure is much more irregular.

    This creates the central question of W5:

    Can Vacuum.Net distinguish between structures that exhibit regular periodicity and structures that display irregular or apparently chaotic behaviour?

    The question is important because the programme’s real value may lie beyond the reconstruction of known regular mathematical structures.

    If the theory can reveal something about irregular winding patterns, it may provide a new way of investigating mathematical complexity.

    If it cannot, that is also a useful result. It would establish a boundary to the theory’s reach.


    10. The role of computer-assisted proof

    The results described above are not based solely on diagrams or intuitive arguments.

    The research uses Cubical Agda.

    Agda is a programming language and proof assistant used to construct formal mathematical proofs.

    A proof assistant is a computer system that checks whether every step in a mathematical argument follows from the preceding steps and the permitted rules.

    It does not simply calculate an answer and declare it correct.

    It checks the logical structure of the proof.

    Cubical Agda is an extension of Agda designed to support ideas from Homotopy Type Theory.

    10.1 What is Homotopy Type Theory?

    Homotopy Type Theory, often abbreviated to HoTT, is a mathematical framework that connects logic, computer science and topology.

    Its central insight is that mathematical equality can be understood in terms of paths.

    If two objects are equal, there can be a path connecting them.

    More importantly, different paths between the same objects can themselves have a mathematical structure.

    This is particularly useful in topology, where the history and form of a movement matter.

    Ordinary mathematical logic often treats equality as a simple yes-or-no relationship.

    Homotopy Type Theory allows equality to have a richer structure.

    This makes it suitable for formalising loops, circles, spheres and higher-dimensional paths.

    10.2 Why formal verification matters

    A complicated mathematical proof can contain thousands of logical steps.

    A human reader may find it difficult to check every detail.

    A proof assistant can verify these steps mechanically.

    This does not mean that the computer discovers the mathematical significance of the result.

    Human researchers still need to formulate the problem, develop the construction and understand what has been proved.

    The computer checks the formal argument.

    The distinction is between discovering mathematics and verifying a mathematical proof.

    The Vacuum.Net research reports that its new results are checked using Agda 2.8.0 and Cubical Library version 0.9.

    The files are checked under the safe option and without postulates.

    A postulate is an assumption accepted without proof inside the formal development.

    Avoiding postulates is important because it reduces the risk that the conclusion depends on an unverified assumption hidden inside the formal system.

    The research also reports independent review of the new files.

    This provides an additional quality-control step.

    The resulting proofs are therefore more than informal mathematical suggestions.

    They are formal constructions whose logical steps have been checked by software.


    11. What is the wider significance for the study of complex systems?

    The mathematical results have a potential wider interpretation.

    The distinction between movement, representation, edges, choices and cycles may provide a useful conceptual framework for investigating complex systems.

    This includes organisations, markets, institutions and human societies.

    It is important, however, to maintain a clear distinction between mathematics and application.

    The mathematical theorems do not automatically establish laws of human behaviour.

    They provide structures that may inspire hypotheses and models.

    Those hypotheses must then be tested against empirical evidence.

    11.1 Systems have states and histories

    A complex system is often described by its current state.

    An organisation may be described by its structure, resources, personnel and performance.

    A financial market may be described by prices, liquidity, expectations and positions.

    A political system may be described by its institutions and current distribution of power.

    But the current state does not necessarily reveal how the system arrived there.

    Two systems can look similar at a particular moment while having very different histories.

    The distinction between a state and a path is therefore important.

    A path preserves the sequence of changes that produced the current state.

    This is one of the central insights of the Wind construction.

    It suggests that understanding a system may require more than measuring its present condition.

    We may also need to understand its movement history.

    11.2 Cycles in human and organisational behaviour

    Many social systems contain recurring patterns.

    An organisation may alternate between expansion and consolidation.

    A market may move through accumulation, tension, release and renewed accumulation.

    A political system may alternate between centralisation and decentralisation.

    An individual may repeat a pattern of adaptation, resistance and renewed adaptation.

    Such patterns can be described as cycles.

    But not every cycle is identical.

    Some cycles are stable and predictable.

    Others change gradually.

    Some appear to repeat but never return to exactly the same configuration.

    The distinction between a genuinely periodic system and an approximately recurring system is important.

    In mathematics, periodicity has a precise definition.

    In social science, apparent repetition must be established through observation and measurement.

    The Vacuum.Net framework suggests investigating the structure of recurring patterns rather than simply describing their frequency.

    11.3 The edge as a decision boundary

    The mathematical edge represents a situation in which two descriptions identify the same position.

    The Choice Theorem shows that a general reversal of the calculation requires an additional logical principle.

    In a social interpretation, an edge could represent a situation in which a system reaches a boundary between two possible developments.

    The available information may describe the situation but may not determine which direction will be taken.

    A decision is then required.

    This could be an individual decision, a collective decision or a change in the structure of the system itself.

    The distinction is important.

    The mathematical theorem does not prove that human beings must make a decision at every social boundary.

    It establishes a specific logical limitation in the mathematical construction.

    The social interpretation is a proposed way of using that structure.

    11.4 Individual choice and collective transitions

    A further question arises.

    Does a system change because an individual makes a decision?

    Or does it change because the collective system reaches a threshold at which a transition becomes unavoidable?

    These are different explanations.

    In some circumstances, a person or institution may make a conscious choice.

    In others, a system may gradually accumulate pressures until a small event triggers a major transformation.

    This resembles the distinction between a decision and a phase transition.

    A phase transition is a change in the qualitative state of a system.

    Water, for example, changes from liquid to gas when conditions cross a critical boundary.

    The transition is not simply a decision by the water.

    It results from the collective behaviour of its components under changing conditions.

    The Vacuum.Net research raises the possibility that the decision required at a mathematical edge might, in a social interpretation, originate either in an individual or in a collective process.

    Determining which mechanism is operating is an empirical question.

    It requires observation, data and an appropriate theory of the social system.

    11.5 Regularity and irregularity in society

    The W5 research question may be particularly relevant to the social sciences.

    Some social systems exhibit recurring structures.

    Others display irregular behaviour.

    A financial market may contain regular seasonal effects while also producing unpredictable movements.

    An organisation may have stable operational cycles but experience occasional structural transformations.

    A society may reproduce familiar institutional patterns for decades before entering a period of rapid change.

    The question is whether these apparently different forms of behaviour can be understood through a common mathematical framework.

    Vacuum.Net proposes investigating the distinction between regular and irregular cycles.

    This is not yet a demonstrated application.

    It is a research direction.

    Its value will depend on whether the theory can generate predictions that can be tested against real systems.


    12. The relationship with earlier work

    The current development does not begin from nothing.

    It connects with earlier work by Konstapel on numbers, movement, financial markets and organisational change.

    Three connections are particularly relevant.

    12.1 Number as movement

    In About Number and Magnitude (2012), the underlying idea was that numbers can be understood through patterns of movement.

    The present research gives that idea a more formal mathematical foundation.

    The movement is represented through streams.

    The streams produce numerical values.

    Different interpretations can lead to the same position.

    The resulting structure can be investigated through formal mathematics.

    12.2 Financial markets as windings

    The 2026 work on financial markets uses the concept of windings to investigate recurring market structures.

    The relevant concepts include address, tension, loading and discharge.

    A market does not necessarily return to exactly the same state after a cycle.

    Its history changes the conditions under which the next cycle takes place.

    This makes the distinction between a closed mathematical loop and an approximately recurring empirical pattern particularly important.

    A financial cycle may have a recognisable structure without being mathematically periodic.

    The mathematical work on windings offers a possible framework for investigating these differences.

    But the connection requires its own empirical and theoretical development.

    12.3 Paths of Change

    The earlier work on Paths of Change treats successful change as a closed path through four world views, following the work of William McWhinney.

    The central idea is that a transformation should not be understood as a single isolated event.

    It involves a movement through different ways of understanding and acting.

    A successful transformation eventually establishes a new relationship between the perspectives involved.

    The concept of a closed path is therefore relevant.

    The new mathematics adds a further question:

    Can the structure of such paths be classified? Can recurring patterns be counted? Can their boundaries and transitions be identified?

    These are potential connections between the mathematical programme and the practical study of organisational change.


    13. What has actually been proved, and what remains open?

    A research programme of this kind must distinguish between results, interpretations and ambitions.

    The distinction is particularly important because the mathematical development is moving into increasingly complex territory.

    The following table summarises the current position.

    SubjectStatus reported in the research
    Exact form of double ternary representationsProved in Agda
    Prefix difference criterion for equal placesProved in Agda
    Every general way back implies LLPOProved in Agda
    Every map from the circle to Kring is constantProved in Agda
    Periodic streams produce loops with the expected windingProved in Agda
    Edge streams reach constant cyclesProved in Agda
    Every loop at a periodic point is classified by the integersOpen
    The proposed tree/circle classification of components of WindArgued on paper, not formally proved
    LLPO gives the converse construction of a way backOpen
    Construction of the sphere from pairs of tritsOpen
    Recognition of the Hopf structure in the netOpen
    A Vacuum.Net explanation of the (\mathbb{Z}/2) resultOpen
    New insight into irregular higher windingsOpen

    The distinction between formal proof and argument on paper must be retained.

    The same applies to the higher levels.

    The classical mathematical results at W1, W2, W3, W4 and W5 are not new discoveries of Vacuum.Net.

    They are established results that provide the mathematical landscape for the next stages of the programme.

    The new contribution must come from demonstrating how the Vacuum.Net construction connects to them.


    14. The central scientific challenge

    The most important question is not whether Vacuum.Net can reproduce the mathematics of the circle.

    That result is already well understood.

    Nor is the main question whether it can reproduce the known homotopy groups of spheres.

    That would be valuable as a formalisation exercise, but it would not necessarily establish a new mathematical contribution.

    The more interesting question is whether the underlying ladder reveals something about structures that are not already understood.

    This is especially relevant to irregular higher-dimensional winding patterns.

    Bott periodicity demonstrates that some mathematical structures exhibit deep regularity.

    The higher homotopy groups of spheres demonstrate that other structures are much less regular.

    The research asks whether Vacuum.Net can help explain this difference.

    There are two possible outcomes.

    First possibility: the net reveals additional structure.

    It may provide a new way to organise, calculate or understand irregular winding patterns.

    If so, this would represent a substantive mathematical contribution.

    Second possibility: the net reproduces known regular structures but cannot explain the irregular ones.

    That would establish a boundary to its applicability.

    This would still be a useful scientific result.

    A theory becomes stronger when its limits are clearly identified.

    The programme should therefore avoid assuming that every resemblance between a ladder and a topological structure represents a genuine mathematical connection.

    Each proposed connection must be demonstrated.


    15. The next research steps

    The exploration plan identifies two immediate possibilities.

    The first is to complete W0.

    The second is to begin W1.

    In my assessment, completing W0 first provides the stronger mathematical foundation.

    Three tasks are especially important.

    Task 1: Complete the classification of loops

    The existing result establishes that periodic streams produce loops with the expected winding numbers.

    The next step is to prove that all loops at a periodic point are exactly classified by the integers.

    This would close the gap between counting the known loops and classifying every possible loop.

    It would also clarify the mathematical relationship between Wind and the ordinary circle.

    Task 2: Establish the structure of the components of Wind

    The research proposes that each connected component of Wind contains at most one cycle.

    A component without a periodic stream is expected to have the structure of an infinitely branching tree.

    A component with a periodic stream is expected to be equivalent, in the relevant topological sense, to a circle.

    This is an argument on paper, not yet a formal theorem.

    Formalising it would strengthen the foundation for the higher-dimensional work.

    Task 3: Construct the sphere

    Once the circle construction is fully understood, the next challenge is to investigate a ladder of pairs of trits.

    Can this construction produce (S^2)?

    Can the resulting structure support the appropriate higher-dimensional winding?

    This is the natural transition to W1.

    The later stages should follow only when the necessary mathematical constructions have been established.


    16. A possible longer-term direction

    The programme suggests a larger research architecture.

    It begins with elementary movement.

    It then investigates how movement produces numerical representations, how different representations meet at boundaries, and why certain decisions cannot be obtained from calculation alone.

    It subsequently introduces paths and cycles.

    Finally, it investigates whether cycles can be extended into higher-dimensional structures.

    This progression can be represented as:

    [
    \text{Movement}
    ]

    [
    \downarrow
    ]

    [
    \text{Representation and calculation}
    ]

    [
    \downarrow
    ]

    [
    \text{Edge and decision}
    ]

    [
    \downarrow
    ]

    [
    \text{Path and cycle}
    ]

    [
    \downarrow
    ]

    [
    \text{Winding}
    ]

    [
    \downarrow
    ]

    [
    \text{Higher homotopy structures}
    ]

    [
    \downarrow
    ]

    [
    \text{Regularity, irregularity and complexity}
    ]

    This architecture has two possible destinations.

    The first is mathematical. It may lead to new constructions in topology, formal mathematics and the theory of computation.

    The second is interdisciplinary. It may provide a conceptual and eventually mathematical framework for investigating recurring structures in complex systems.

    The two destinations should remain connected but distinct.

    The mathematical programme must establish its results independently of their possible social applications.

    The social applications must be tested independently of the mathematical elegance of the underlying construction.

    This separation is essential if the programme is to develop as a credible scientific contribution.


    17. Conclusion: from knowing where we are to understanding how we move

    The development of Vacuum.Net represents a shift in mathematical perspective.

    It begins with a simple sequence of movements.

    The sequence can be read as an address or as a calculation.

    Different sequences can identify the same position.

    At the boundary between these representations, a general reversal requires an additional logical principle.

    The mathematics therefore identifies a precise distinction between calculation and decision.

    The next development introduces movement as a path rather than merely a relationship between states.

    This makes it possible to retain the history of movement.

    When a stream returns to itself, it produces a cycle.

    When the cycle is mapped to a circle, its movement can be counted as a winding.

    The edge streams themselves lead to the simplest possible cycles.

    The research then moves beyond the circle.

    It investigates whether the same construction can produce spheres, higher windings and more complicated topological structures.

    The wider ambition is to understand how regular and irregular patterns emerge from a common mathematical foundation.

    This may eventually have relevance for the study of financial markets, organisations and social systems.

    But that relevance must be demonstrated, not assumed.

    The most important question remains open:

    Can Vacuum.Net discover mathematical structure in irregular patterns that existing approaches do not readily explain?

    If it can, the programme may contribute something new to mathematics and to the understanding of complex systems.

    If it cannot, identifying the precise boundary of its explanatory power will still be a meaningful scientific achievement.

    The next stage is therefore not simply to climb higher.

    It is to discover whether the ladder itself reveals something about the nature of the structures it encounters.


    Annotated References and Further Reading

    The references are organised by subject. Each annotation explains why the work is relevant and what a reader can expect to find. The list includes the primary Vacuum.Net documents and established mathematical literature.

    A. The primary Vacuum.Net research

    1. Konstapel, J. (2026). Mathematical Theory Generated with the Vacuum.Net Theory. Version 7.0, reference edition, 19 November 2026.

    The principal mathematical reference for the original Vacuum.Net ladder. It develops the three-valued movement system, the address and calculation interpretations, and the mathematical treatment of edges. It also contains the earlier formal results on the relationship between the base-three and base-two representations.

    Recommended for readers who want to understand the mathematical foundations before studying the newer results.

    2. Konstapel, J. (2026). Edges, Choice and Countable Cycles. Research Note 1, version 1.0, 20 November 2026.

    The immediate source for the first part of this essay. It presents the Edge Theorem, the prefix difference criterion, the connection between a general way back and LLPO, and the first results on countable cycles and winding numbers.

    The document also distinguishes formal results from arguments on paper and wider interpretations.

    3. Konstapel, J. (2026). Upward in the Windings: The Higher Turns of the Vacuum.Net Ladder. Exploration plan and first result, version 0.2, 20 November 2026.

    The immediate source for the second part of this essay. It develops the Wind construction and presents the research programme from W0 to W5.

    It is particularly useful for understanding the intended transition from the circle to higher-dimensional topological structures.

    4. Konstapel, J. (2012). About Number and Magnitude.

    An earlier conceptual foundation for the idea that numbers can be understood through movement and that reversing mathematical operations may reveal new structures.

    Useful for readers interested in the intellectual history of the Vacuum.Net approach.

    5. Konstapel, J. (2026). Understanding Financial Markets through Vacuum.Net Theory. The Foreseeability Boundary: Windings, Loading and the Physics Hidden inside Economics.

    Develops the application of winding concepts to financial markets. Introduces the relationship between address, tension, loading and discharge.

    Useful for social scientists, economists and readers interested in the possible empirical applications of the theory.

    6. Konstapel, J. (2020). About Paths of Change (PoC).

    Discusses successful change as a closed path through different world views, drawing on the work of William McWhinney.

    Useful for understanding the connection between cycles, organisational transformation and the wider Guide of Humanity project.

    7. Konstapel, J. (2026). The Spiral Navigator.

    Discusses the use of the Hopf fibration and Bott periodicity in the development of SWARP.

    Relevant to the practical and geometric implications of the higher winding programme.

    B. Constructive mathematics and logical foundations

    8. Bishop, E. and Bridges, D. (1985). Constructive Analysis. Springer.

    A foundational work in constructive mathematics.

    It explains why mathematical existence proofs should provide constructions and why certain classical logical principles cannot simply be assumed.

    Essential background for understanding the distinction between classical and constructive reasoning.

    9. Bridges, D. and Richman, F. (1987). Varieties of Constructive Mathematics. Cambridge University Press.

    A more detailed examination of different constructive mathematical frameworks.

    Particularly relevant to LLPO and the logical principles underlying the Choice Theorem.

    10. Diener, H. (2018). Constructive Reverse Mathematics. Habilitation thesis. arXiv:1804.05495.

    An important survey of constructive reverse mathematics.

    This field investigates which additional logical principles are needed to prove particular mathematical results.

    It provides the wider context for understanding why the Vacuum.Net Choice Theorem is significant.

    11. Stanford Encyclopedia of Philosophy. Constructive Mathematics.

    An accessible introduction to the philosophical and mathematical foundations of constructive mathematics.

    Particularly useful for readers who want to understand why mathematicians distinguish between proving existence and constructing an object.

    C. Computable analysis and number representations

    12. Weihrauch, K. (2000). Computable Analysis. Springer.

    A standard reference on the representation of real numbers and the computational treatment of mathematical objects.

    Useful for understanding why redundant number representations can be important in computation.

    It also provides a broader context for the distinction between numerical values and their representations.

    D. Homotopy Type Theory and formal topology

    13. The Univalent Foundations Program (2013). Homotopy Type Theory: Univalent Foundations of Mathematics. Institute for Advanced Study.

    A major introduction to Homotopy Type Theory.

    The book explains how equality, paths, loops and higher-dimensional structures can be represented within a formal mathematical framework.

    Chapters 2 and 6–8 are particularly useful for understanding the mathematical background of the Wind construction.

    Free online edition:

    14. Vezzosi, A., Mörtberg, A. and Abel, A. (2021). “Cubical Agda: A Dependently Typed Programming Language with Univalence and Higher Inductive Types.” Journal of Functional Programming, 31, e8.

    Introduces Cubical Agda and explains how it supports formal reasoning about equality and higher-dimensional mathematical structures.

    Essential for readers interested in how the Vacuum.Net results are machine-checked.

    15. Licata, D. R. and Shulman, M. (2013). “Calculating the Fundamental Group of the Circle in Homotopy Type Theory.” Proceedings of LICS 2013, pp. 223–232.

    A foundational formalisation of the result that the fundamental group of the circle is the integers.

    This establishes the mathematical background for W0.

    It also demonstrates how algebraic topology can be formalised using Homotopy Type Theory.

    https://dlicata.wescreates.wesleyan.edu/pubs/ls13pi1s1/ls13pi1s1.pdf

    E. Higher-dimensional topology

    16. Brunerie, G. (2016). On the Homotopy Groups of Spheres in Homotopy Type Theory. PhD thesis.

    An important contribution to the development of synthetic homotopy theory.

    Provides the background for the result concerning the fourth homotopy group of the three-dimensional sphere.

    Useful for readers who want to understand the mathematical depth of W3.

    17. Ljungström, A. and Mörtberg, A. (2023). “Formalizing π₄(S³) ≅ ℤ/2ℤ and Computing a Brunerie Number in Cubical Agda.” Proceedings of the 38th Annual ACM/IEEE Symposium on Logic in Computer Science.

    Demonstrates a formal computer-assisted proof of:

    [
    \pi_4(S^3)\cong\mathbb{Z}/2
    ]

    Particularly relevant to W3 and the question of whether the Vacuum.Net ×2 structure has a meaningful connection to the appearance of two-element homotopy groups.

    https://arxiv.org/abs/2302.00151

    18. Hatcher, A. Algebraic Topology. Cambridge University Press, 2002.

    A widely used introduction to algebraic topology.

    Covers fundamental groups, homotopy groups, spheres and the Hopf fibration.

    An excellent reference for readers who want to understand the established mathematics underlying W0–W5.

    Free online edition:

    https://pi.math.cornell.edu/~hatcher/AT/AT.pdf

    19. Bott, R. (1959). “The Stable Homotopy of the Classical Groups.” Annals of Mathematics, 70(2), 313–337.

    The foundational paper on Bott periodicity.

    Shows that certain homotopy structures repeat in regular cycles.

    This is the principal mathematical background for W5 and its investigation of regularity and periodicity.

    https://webhomes.maths.ed.ac.uk/~v1ranick/papers/bott4.pdf

    20. Toda, H. (1962). Composition Methods in Homotopy Groups of Spheres. Annals of Mathematics Studies 49. Princeton University Press.

    A major reference on the homotopy groups of spheres.

    Useful for understanding why higher-dimensional winding structures can be irregular and difficult to classify.

    It provides important background for the W4 and W5 research questions.


    Final note on the research programme

    The mathematical programme and its wider interpretation should be read as two connected but distinct investigations.

    The mathematical programme asks what can be constructed and proved from the Vacuum.Net ladder.

    The interdisciplinary programme asks whether the resulting concepts can help explain recurring structures, boundaries, decisions and transformations in real-world systems.

    The first requires formal mathematical proof.

    The second requires conceptual clarity, empirical investigation and independent testing.

    The most productive development will be one in which each side strengthens the other without confusing mathematical demonstration with social interpretation.

    Article

    Mathematical Theory Generated with theVacuum.Net Theory